ClearBoost plus FPV Set Rewards

If you own any 5.8GHz FPV or Video downlink equipment (or are looking to puchase more!) and are looking to extend your flight capabilities by adding ClearBoost you can back us and receive a ClearBoost plus everything you need to get a video signal to the ground and viewable. If you already have video transmitters and receivers or a full FPV/Video setup then check out our Standalone ClearBoost Rewards instead.

Receive ClearBoost Cheaper than Retail

Our post-Kickstarter retail price will be US$68.99, or around CA$93.15.
By backing us on Kickstarter, you will receive your ClearBoost first, as well as receiving an excellent price!

All our reward levels come with free shipping, anywhere in the world

No added costs, no matter where you live. Basic airmail shipping is included in your reward.
Want ClearBoost faster? You can pledge extra for express or courier shipping - Contact Us for pricing.

Wireless Set

Approx US$166.60

CA$225

  •  
  •  
  •  
  •  
  •  
  • CA$110 for Upgrade
  •  
  •  
  •  

BOSCAM

Approx US$222.10

CA$299

  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  

ImmersionRC

Approx US$308.60

CA$416

  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  

Ready to FPV

Approx US$346.60

CA$468

  •  
  •  
  •  
  •  
  •  
  • CA$109 for Upgrade
  •  
  •  
  • CA$60 for Upgrade

Component Technical Specifications

BOSCAM

TS353 400mW 5.8GHz Transmitter

BOSCAM TS353 Transmitter

Channels 8
Video Format supported NTSC/PAL
Working Frequency 5645-5945Mhz
Antenna Connection RP-SMA
Power Input 7-15V (3S LiPo suggested, does NOT support 4S Lipo)  
Dimension 55 x 26 x 17mm (excluding antenna)

May require an amateur radio license to operate

RC305 5.8GHz Receiver

BOSCAM RC305 Receiver

Channels 8
Working Frequency 5645-5945Mhz
Antenna connector: RP-SMA 
Receiver operating voltage 5VDC
Video bandwidth 0~8.0MHz
Audio frequency 6.5MHz
Dimensions 61x52x13mm

Why Would I Choose BOSCAM?

Technically, we prefer BOSCAM transmitters and receivers over ImmersionRC because their circuitry is better layed out, and specifically because their RF engineering is superior. However, BOSCAM is Chinese and some of their products have been reported to underperform. We have selected parts that we have tested to live up to their specifications. ImmersionRC are a well known european brand, meaning you pay more, however are still made in China.

ImmersionRC

600mW 5.8GHz Transmitter

ImmersionRC 600mW 5.8GHz Transmitter

Channels 7
Video Format supported NTSC/PAL
Working Frequency 5740-5860Mhz
Antenna Connection SMA
Power Input 6-25V (3S LiPo suggested)
Dimension 50 x 23 x 15 mm (excluding antenna)

May require an amateur radio license to operate

UNO5800V4 5.8GHz Receiver

ImmersionRC Uno5800 5.8GHz Receiver

Channels 32 
Working Frequency 5645-5945Mhz
Antenna connector: SMA 
Receiver operating voltage 6-16VDC
Video bandwidth 0~8.0MHz
Audio frequency 6.5MHz
Dimensions 90x76x28mm

SpiroNet 5.8GHz Antenna

ImmersionRC/FatShark SpiroNet Antenna

Available in SMA and RP-SMA.
You will receive the correct version for your transmitter & receiver.

We tested these to be among the best value antennas. We were very impressed with their performance over stock antennas, so are including them with every package.

 

MyFPVStore.com

8" Outdoor FPV Screen

8" Outdoor Viewable FPV Screen

Resolution 800x480
Pixel Size 0.0736(W)x0.207(H)mm
Display Ratio 16:9
Brightness 450cd/m²
Viewing Angle 70°/70°(L/R) 50°/70°U/D
Contrast Ratio 500:1
Response Time 15ms
Input Voltage DC 6-16V (2s-4s compatible)
Speaker built in, 1W
Power Consumption ≦8W
Input Signal RCA video and audio
NTSC/PAL Manually Selectable in Menu
Size 209 x 147 x 35 mm
Weight 620g with cables and sun shield
Mounting Standard 1/4-20 tripod and VESA mounts

Includes sun shade.

As seen in our Kickstarter video & Groundstation

10.1" Outdoor FPV Screen

10.1" Outdoor Viewable FPV Screen

Resolution 1024X600
Brightness 450cd/m² 
Contrast 500: 1
Aspect ratio 16: 9
Backlight LED
Inputs RCA, VGA, HDMI, YPBPR
Surface Treatment Anti-Glare 

Includes sun shade.

We use these in our ground stations and videography rigs.

600TVL WDR Camera

600TVL WDR FPV Camera

Sensor 1/3" SONY SUPER HAD II CCD
DSP Nextchip 2040 DSP
Resolution 768(H)×494(V)
Format NTSC
Shutter 1/60~1/100000 sec
Input Voltage 5-22VDC
Current 70mA Min.
Illumination 0.01Lux
Lens 2.8mm
Size 25 x 25mm

As seen in our Kickstarter video & all our aircraft. We prefer this cameras image quality and colour over everything else.

 

Connector Options

After the funding period of the Kickstarter campaign is completed, you will be sent a survey to select the types of connector you wish you receive. Whether you need RP-SMA or SMA connectors will depend on your receiver. We will send more information on this to help you make the right choice with the survey.

For goggle use, we recommend a right angle connector, for typical ground station use a straight connector tends to work best.

Straight ClearBoost Connector

Straight Connector

  • Available in RP-SMA or SMA receivers.
  • Rated for 8GHz operation.
  • Mounts ClearBoost inline with your receiver
Right Angle ClearBoost Connector

Right-Angle Connector

  • Available in RP-SMA or SMA receivers.
  • Rated for 8GHz operation.
  • Mounts ClearBoost at a right angle to your receiver

Need extra connectors?

If you have more than one receiver type, you might need more than one connector.
Pledge an extra CA$7 with your reward to receive an extra connector, or pledge an extra CA$17 to receive a full set of all the connector options.

We use cookies

We place cookies on your computer to remember your settings and understand how people use our website. By using this site you accept this. Read more.